25/02197/TREEPlanning Application 25/02197/TREE

-G1 x8no. cherry laurel, damson, hornbeam, horse chestnut, holm oak, hawthorn, Lawson cypress, whitebeam - raise northeastern crown to 2.5m above Public Right of Way and 5.2m above highway, sympathetically raise southeast crown to 4m above driveway. -G1.1 Holm oak - reduce dead branches to fence line, leaving a deadwood habitat stub. -G2 x6no. ash, beech, hornbeam, horse chestnut, holm oak, weeping willow - raise northeastern crown to 2.5m above Public Right of Way and 5.2m above highway, reduce branches encroaching BT line to provide a 1m clearance. -G2.1 beech - remove dead branches over Public Right of Way. -G2.2 ash - remove dead branches over Public Right of Way. -G2.3 hornbeam - thin crown 20%, removing up to 50mm diameter branches. -G2.4 hornbeam - remove suspended dead branch. -G2.5 ash - reduce to a 2.5m wildlife pole. -T5 hornbeam - reduce crown by 1.5-2m. -T7 twisted willow - reduce to previous reduction point at 6m. -T10 horse chestnut - reduce west crown to provide a 2m clearance of the building. -T11 Holm oak - remove secondary branch that is encroaching building and thin the overhanging primary branch 20% to reduce the leverage dynamics. -T12 beech - snap off dead branch located at 4metres to the east. -G13 Cotoneaster x 3no. - reduce by 3m, removing larger stem re-growth to original reduction point, to thin out the crown and allow growth lower down the stem.

25/02197/TREE