Planning applications in PL3
We hold 200 planning applications for the PL3 postcode area, 101 of them submitted in the past year. 84% of decided applications here were approved. A decision typically takes 50 days. The area is covered by Plymouth.
Councils covering PL3
Recent applications in PL3
Pre-application for replacement/repair of 5 sliding sash windows, The recommended approach is to retain and repair sound historic fabric wherever viable, while replacing terminally failed or non-historic units with accurately detailed Sapele hardwood sliding sashes incorporating appropriate weather-sealing and slender-profile glazing. The proposed works are intended to restore architectural consistency, protect the listed building from further moisture
T1 Leylandii - reduce by approximatly 1/3 to a width of 6m and height of 7m.
T1 - Sycamore - Remove to near ground level
Variation of Condition 1 (Approved Plans) of application 25/01330/FUL to alter front canopy roof (retrospective)
4no. wooden double glazed sash windows replacing existing uPVC.
Change of use from dwelling (Class C3) to supported living accommodation (Class C2) for up to 4no. young people
T1 - Reduce to 15m height and 5m radius
Pre-application for extension of a bed and breakfast building to increase bedroom numbers
Two conifers and 1 apple tree - reduce their height
Extension over existing attached garage with associated roof works, single storey rear extension and front porch
Three storey residential building comprising 18 affordable flats with associated vehicular and pedestrian access, car parking, cycle and refuse storage, communal amenity space and associated works
T1 Yew tree - reduce leaving a finished crown height of 6m.
Retaining walls, infill and raising of land levels, boundary fencing and planting (retrospective)
Change of use of an existing shed to provide a Dog Grooming Salon (retrospective)
T1 Fell and G1 reduce to 1.8m hedge height.
Erection of an illuminated small format advertising display
The construction of a new residential scheme comprising of two bungalows, a three-storey building containing six flats, and thirteen two-storey houses
Erection of a single storey rear extension extending 6 metres beyond the rear wall of the original dwellinghouse, with a maximum ridge height of 2.9 metres and an eaves height of 2.05 metres.
Discharge Condition 3 (Ecological Enhancement Measures) of application: 26/00036/FUL.
Single storey rear extension
Magnolia- Crown to be reduced as shown in the photographs
G1 reduced to 2m high, width to be reduced to 1.8m. T1 Lime. reduce upper crown by 2m, re pollard tree back to previous pruning points, height from 12m to 10m width from 6m to 4m, lift lower crown to 4.5m
Reduce crown of bay tree by 2m in height (in line with foot pegs on bt pole) + 0.5m on lateral branches
Pre-application for proposed second-floor extension to form additional flat and partial change of use of ground floor from Class E(a) (Retail) to Class Sui Generis (Hot Food Takeaway), together with alterations to the existing shopfront, a rear extension, and associated works.
T1 Sycamore - Re-pollard to approximatly 5m
Single storey front and side extension, with rear raised deck
Hardstanding with engineering works
G1 crown reduce by 1m G3 - crown reduce by 1-1.5 metre. T4 + T5- crown lift to 2.5 metres over entrance.
Single storey front/side annexe extension
T1 Holly - Fell T2 Holm Oak - Remove two lowest limbs South side T3 Holm Oak - Reduce to union at 3m. T4 Oak - Remove first limb growing East.
G1 Limes - Re-pollard to 4.5m to 5m. T1 Holm Oak - Crown raise to 7m over highway and clear and limbs overhanging street light. Crown raise to approximatly 5m on garden side of tree. Leaving a finished crown spread of15m.
Prior approval for the demolition of a vacant office building
Single storey rear and side extension with associated raised rear terrace
Erection of a D6 small format advertisement display
Fell one willow tree
Two-storey side and part single storey rear extension
First floor garage extension to create games room
T1 Sycamore -Reduce leaving crown width of 5m. No height reduction required.
Raised decking to rear garden
Change of use from offices to four houses in multiple occupation (Class C4) with associated external alterations, including removal of external rear staircase, form opening in rear boundary wall.
Single storey rear/side extension and front porch
T1 - Cedar - Reduce in height to previous points leaving the tree stranding at 6m. T2 - Mimosa - Reduce entire canopy leaving the tree standing at 4m.
T1 - Beech - Crown raise to 5m from ground level and reduce canopy
Tree 1 - reduce crown to 18m and width to 10m. Remove all sucker growth. Oak 1 remove the first lower limb on the left-hand side and reduce height to 7.5m and crown reduction by 1-2m.
Demolition of rear external steps, UPVC structure, and adjacent canopy structure, enlargement of rear decking, and window/door reconfiguration
Two storey side and rear extensions, front porch extension with internal alterations and enlarged garage with associated works
Construction of a detached triple garage
Erection of EV chargers, sub-station enclosure, LV panel, meter cabinet, and associated works
Demolition of garage, replaced with new two storey side extension with roof accommodation
Magnolia reduction leaving total circumference of the tree at 2.5m