26/AP/0496Planning Application 26/AP/0496

Works to tree with TPO: Tree ID 6295 OAK Crown Lift: Remove one low branch growing at approximately 3 metres in height on the main trunk. Remove all epicormic growth up to 4 metres. Ivy Removal: Carefully remove all dead ivy from the trunk and major limbs, taking care not to damage the bark. Dead Wooding: Remove a small amount of dead wood from the canopy. Crown Thinning: Thin the upper crown by up to 10% to improve light penetration and reduce wind resistance. This should be done by selectively removing small, sub-dominant branches.Tree ID 6297 YEW Height Reduction: Reduce the height by 40%, to approximately 7 metres. Pruning should be made to suitable growth points wherever possible to maintain the tree's health and form.Tree ID 6298 OAK Crown Lift: Remove epicormic growth up to 3 metres on the main stem. Crown Thinning: Thin the upper crown by up to 10% to improve light penetration and reduce wind resistance. This should be done by selectively removing small, sub-dominant branches, and pruning cuts should be made to suitable growth points. The overall height and basic shape of the tree should be maintained.Tree ID 6300 OAK Dead Wooding: Remove dead wood as needed. Crown Lift: Lift the lowest branches over the road by up to 1.5 metres to give a minimum of 5.2m clearance from ground level and to balance the crown.

26/AP/0496