The General Architecture Company Ltd

6m deep single storey rear extension. Existing outbuildings demolished prior to construction.

Two storey rear extension and single storey rear extension. Two storey rear extension. Depth 3m. Eave height as existing dwelling. The relevant being the eave height of the main roof. Ridge height lower than existing dwelling. Greater than 2m to the boundary. Pitched roof extension with glazing. Render finish to elevations and tile finish to roof to match existing. Single storey rear extension. Depth 2.5m. Eave height to flat roof surface less than 4m. Greater than 2m to the boundary. Flat roof extension with parapet. Render finish to elevations to match existing.

Discharge of condition 7a (joinery details) on planning permission 25/02343/LBC

Proposed porch and changes to the front elevation.

Demolition of existing single storey rear wing containing kitchen, and replacement with new single storey extension. Re-configuration and new roof to existing outbuildings. New single storey detached double garage.

Certificate of lawful development for proposed work following planning approval for a two storey extension granted under planning reference PL/2017/00455/MINFHO. A meaningful start to the works has taken place and this is to formally confirm making the approval extant.

New double garage with conservatory and office at first floor.

Single storey rear extension 8m deep. Render over masonry to match the existing house. Flat roof with parapet.

Demolition of existing conservatory and construction of a single storey side extension

Single storey side extension. Less than 4m to the eave, greater than 2m to the boundary. Width of dwelling is 10.78m. Proposed width of extension is half of 10.78m, at 5.39m. Extension to be rendered to match the existing dwelling. Flat roof with parapet. Dimension given on drawings is to height of extension / surface of roof excluding the parapet as clarified in Technical Guidance for Permitted Development Rights.