Stefan Shaw Studio Limited

Details of Condition 7 - materials as required by planning permission 20/AP/2164 dated 23/12/2020 for change of use and conversion from two units used as Houses in Multiple Occupation (Class C4) to 4 studio flats (C3) and 1, two bedroomed flat on the second floor, together with a rear second floor extension and ancillary amenity space, cycle and refuse area to the side and rear

Loft conversion to include a rear dormer extension, raising of the roof ridge by 400mm and creation of a mezzanine-level office.

Construction of a side dormer extension to the main roof slope at second floor level; squaring off of the existing side lean-to roof at ground floor level; replacement of the existing front and rear entrance doors to the side lean-to extension; and installation of new glazed rear doors at lower ground floor level to the main dwelling.

Details of Condition 7- Material samples of the proposed cladding on the second floor extension and detailed drawings of the shopfront as required by planning permission 20/AP/2164 dated 23/12/2020 for change of use and conversion from two units used as Houses in Multiple Occupation (Class C4) to 4 studio flats (C3) and 1, two bedroomed flat on the second floor, together with a rear second floor extension and ancillary amenity space, cycle and refuse area to the side and rear

Application for a Lawful Development Certificate (proposed) submitted under Section 192 of the Town & Country Planning Act 1990 (as amended) and Classes B and C of Schedule 2, Part 1?of the Town and Country Planning (General Permitted Development) (England) Order 2015 (as amended) for the construction of a dormer extension to the rear roof slope and installation of two rooflights in the front roof slope at 44 Elsinore Road, SE23 2SL

Side return infill with Dormer and outrigger extension including raising the ridge with roof-lights to the front pitch.

Installation of one external air source air conditioning unit (Daikin, Model No. RZAG50A) at ground floor level within the rear garden patio area, floor-mounted a minimum of 1.0m from the boundary wall/fence. No alterations are proposed to the external fabric, footprint, or massing of the host dwelling.