Seam Architects Limited

Alterations to existing glazed curtain walling and cladding to provide a new level access door to the ground floor office.

Demolition of existing rear porch and erection of single storey extension to rear

Use of retail unit (Use Class A1) as a restaurant (Use Class A3)

Erection of raised timber decking to rear garden and installation of bi-folding door

External alterations to glazing and cladding to existing office building

Retention of air handling units (AHUs) with new acoustic louvred enclosures at basement level.

Demolition of existing boundary wall and construction of new brick boundary wall with brick piers and timber panel infill and associated replacement planting at 1 Allenby Road, SE23

Installation and display of two halo illuminated fascia signages measuring: (i) 0.8m in width, 0.0.485m in height, at a height above ground of 1.4m, and (ii) 0.8m in width, 0.38m in height, at a height above ground of 0.95m.

Alterations to shopfront; installation of awning; installation of extract vent to northeast elevation; single storey rear extension

Minor Material Amendment (S.73) to vary condition 2 (Approved Plans), for changes to the materials and appearance pursuant to planning permission 185306FUL dated 26/02/2019 for 'Construction of two additional storeys to part of the existing office building along with a three-storey rear extension; single storey detached outbuilding for use as a substation'

Installation and display of two halo illuminated fascia signages measuring: (i) 0.8m in width, 0.0.485m in height, at a height above ground of 1.4m, and (ii) 0.8m in width, 0.38m in height, at a height above ground of 0.95m.

Retention of air handling units (AHUs) with new acoustic louvred enclosures at basement level.

Erection of raised timber decking to rear garden and installation of bi-folding door

Demolition of existing rear porch and erection of single storey extension to rear