SCG Design Ltd

Single storey rear extension (projecting beyond the rear wall of the original house by 5m, maximum height 3.6m, height to eaves 2.5m) to dwelling

Single storey side and rear extensions to dwelling house (bedroom, wetroom and enlargement of lounge)

Formation of a new access and dropped kerb to include alterations to driveway and erection of a detached garage (Revised Scheme)

Two Storey Side Extension And Single Storey Rear Extension

Replacement Roof With Steeper Pitched Roof With Dormers To Create Additional Bedroom And Improve Circulation For Disabled Access

Single storey rear extension (projecting beyond the rear wall of the original house by 5m, maximum height 3.6m, height to eaves 2.6m) to dwelling house

Erection of single storey rear extension measuring 4 metres in length, with a maximum eaves height of 2.95 metres and maximum overall height of 3.35 metres (Prior Approval)

Single storey rear extension (projecting beyond the rear wall of the original house by 3.5m, maximum height 3.5m, height to eaves 3m) to dwelling house

Erection of a single-storey rear extension, removal of existing single-storey front extension (conservatory) and erection of a new single-storey front extension (infill area) and changes to the existing fenestration

Single storey rear extension (projecting beyond the rear wall of the original house by 4m, maximum height 3.65m, height to eaves 2.45m) to dwelling house

Erection of a single storey rear extension measuring 4.55m in length from the rear wall of the original dwellinghouse, with a maximum eaves height of 3.3 metres and a maximum height of 3.3 metres

Erection of single storey rear extension measuring 4 metres in length, with a maximum eaves height of 2.5 metres and maximum overall height of 3.5 metres (Prior Approval)

First floor side and rear extension (2 bedrooms)

Two storey side and single storey rear extensions including roof alterations from a hip to gable roof design (bathroom, extended bedroom, open undercroft, kitchen/dining area, utility/office, store, bedroom and storage space).

Non material amendment to 21/00592/FUL to change from brickwork to render to all areas of front elevation and first floor side elevation

Installation of roof lights to the front elevation and a dormer to the rear elevation to form rooms in the roof space

Extensions and alterations to existing dwelling to include the provision of attached annexe accommodation

Erection of a single-storey side and a single-storey rear extension and conversion of integral garage into habitable living accommodation

Single storey rear extension (projecting beyond the rear wall of the original house by 4.05m, maximum height 3.6m, height to eaves 2.5m) to dwelling house

Single storey rear extension (projecting beyond the rear wall of the original house by 5.6m, maximum height 3.5m, height to eaves 3m) to dwelling house