Hyphen Archi Ltd

Details showing the omission of all works to remove/relocate the doors at first floor level and the associated installation of a fire curtain pursuant to Condition 2 of listed building consent dated 23rd May 2023 (RN: 23/01385/LBC).

Minor internal structural works associated with the infill of contemporary floor void at ground floor and removal of three contemporary wooden balustrades.

Internal alterations to unit 8 in the Covent Garden Market Building including replacement signage.

Display of a sign to awning measuring 0.15m x 0.7m and a non-illuminated acrylic sign to shopfront glazing measuring 0.13m x 0.6m.

Minor internal alterations including replacement/ new millwork fixtures, re-hanging/ reinstatements of several historic doors within existing frames/ portals, addition of decorative wall moulding panels in 1st Floor room and reconfiguration works to modern fitting rooms at rear of 1st Floor level to enlarge 1no. fitting room and establish individual access points to each, and re-opening of existing door to corridor through modern partition lining.

Proposed reconfiguration of internal layout & M&E works to facilitate a café use to Ground Floor and Basement to the Scottish Provident Building, 11 Donegall Square West, Belfast, BT1 6JH along with temporary seating to Donegall Square West.

Display of a sign to awning measuring 0.15m x 0.7m and a non-illuminated acrylic sign to shopfront glazing measuring 0.13m x 0.6m.

Display of an internally illuminated fascia sign measuring 34cm x 180cm; an internally illuminated projecting sign measuring 50cm x 50cm; and two internally illuminated lightboxes measuring 73.6cm x 104.4cm and 120cm x 80cm.

Proposed reconfiguration of internal layout & M&E works to facilitate a café use to Ground Floor and Basement to the Scottish Provident Building, 11 Donegall Square West, Belfast, BT1 6JH along with temporary seating to Donegall Square West.

Minor internal alterations including replacement/ new millwork fixtures, re-hanging/ reinstatements of several historic doors within existing frames/ portals, addition of decorative wall moulding panels in 1st Floor room and reconfiguration works to modern fitting rooms at rear of 1st Floor level to enlarge 1no. fitting room and establish individual access points to each, and re-opening of existing door to corridor through modern partition lining.