HLN Ltd

Replacement of the critical low voltage infrastructure to the South Site and excavation and reinstatement of the required trench works across the North site to facilitate the installation of the required cables.

Application to determine details for conditions 5 (contaminated land verification report), 14 (landscape management plan) and 18 (ecological enhancement strategy) attached to planning approval 2019/10502/PA

External works to a Listed Building to remove ATM and all external signage

Non material minor amendment to approved application 21/01440 (Erection of a substation, cycle and bin stores, plant compound, 2.5m high fencing, replacement footpaths to side and rear, covered external area, external lighting, cctv cameras, vehicular access gate, pedestrian access gate both with video/audio points, creation of 7no. parking spaces, replacement and alterations to windows and doors (existing footpaths, fencing and gate to be removed)) to allow amendments to fencing and first floor cladding

Subdivision to create 2no. retail units including fenestration/shop front alterations

Construction of a single storey front extension and loft conversion,with all associated works at Kingswood, 1 Sydenham Park Road SE26.

Consent to DIsplay - 2no. internally illuminated fascia signs.

Internally Illuminated ATM and MFD external Collars

Installation and display of two internally illuminated projecting signs measuring 0.6m high, 0.825m wide, at heights above ground of 4.085m and 4.2m.

Certificate of Lawfulness (Proposed) for a like-for-like wall rebuilt in the same location and to the same height (existing wall to be demolished)

SITING OF 1NO. INTERNALLY ILLUMINATED ATM SIGNAGE

Erection of a hip to gable end roof extension and construction of a dormer extension within the rear roof slope. Installation of two roof lights within the front roof slope.

Listed Building Consent: Seal Letterbox externally with ply and paint white to match existing. Remove all External Signage and Branding including any 'Projecting Signs' and 'Branch Name plates'. Remove ATM to shopfront. Board over aperture/surround with secure partition with rendered cement board, white finish to match existing. Remove Nightsafe to shopfront. Board over aperture/surround with secure partition with rendered cement board, white finish to match existing.Remove any internal IDM machines. All low level external glazing to doors and windows are obscured with white vinyl (applied internally).

Submission of details to discharge Condition numbers 3 (Stone Details) and 4 (Making good works) in respect of Decision Notice PA24/05739 dated 11/04/25

Display of 1 x internally illuminated ATM signage

Approval of conditions 2 (materials) and 3 (stitching) of planning permission PL/24/1824/HB - Listed building consent for taking down and reinstatement of a dangerous part of the boundary retaining wall and planter walls

Amendment to 22/00080/F to change the proposed roof finish.

Installation of ATM machine

Listed Building Consent for minor works to the building to include repair or replacement of broken, slipped or missing slate tiles. Flat roof coverings to be replaced or overlayed with new roofing system including upstands, drainage gulleys and flashings, ensure all rainwater goods are discharging effectively. Hoppers and back gutters to be cleaned out and ensured they are free of vegetation. Downpipes are to be inspected and connections checks to ensure effective rainwater discharging. Flashings to be checked and repaired. Windows to be inspected and defects fixed by cutting out and scarf in defective timber, rake out defective putty, replace broken or cracked glazing, apply new putty and decorate to match existing.

Listed building consent for taking down and reinstatement of a dangerous part of the boundary retaining wall and planter walls