Fairview Architecture Limited

Rear extension at ground floor level: lean-to using matching materials, within size limits for PD. Loft conversion at second floor level: internal conversion without extending roof shape/size (i.e. under ex. roof). Addition of rooflights no more than 150mm from the plane of the roof. Side rooms at ground floor level: internal remodelling incl. insulation and replacing existing flat roof covering.

Single storey rear extension to dwelling

Reconversion of three flats into one dwelling (Certificate of proposed development)

Two storey rear extension to dwelling.

Discharge of conditions for 25/1163/FUL : Condition 3 (surface water drainage)

Single storey side extension to dwelling, to provide improved kitchen/living space

First floor rear extension to provide new bedroom above ex. ground floor extension. Form new side window for bathroom (obscure glazing).

First floor rear extension

Amendment of selected windows, including omission of 2no, and addition of 2no. rooflights to the approved 25/1816/FUL

Single storey rear extension extending maximum 3.5m, maximum height to eaves 3.65m, maximum overall height of 3.65m.

Single storey side extension replacing outbuildings. This is a scheme similar to that approved under 23/0502/FUL, but reduced in size.

Single storey rear extension to dwelling.

Construction of first floor rear extension.

Reduction in roof height and shape. Change to substrate of material cladding part of building.

Demolition of barn and replacement with pool house.

Prior approval application for change of use from commercial office (Use Class E) to 1 bed dwelling flat (C3 Use Class).

Replacement slates to roof, elevations and bay windows

Single storey rear extension to dwelling.

Change of use of part of first floor office to dwelling, and incorporate existing flat above to form 1x maisonette over 1st and 2nd floors.

Discharge of Condition for 25/2243/FUL: Condition 3 (Habitat Management and Monitoring Plan).